Quality Control Instruments

Measures the hardness of soft metals such as aluminum, aluminum alloys, copper, brass, and other materials such as harder plastics, and fiber-reinforced plastic . Conforms to ASTM B648/D2583, DIN EN 59, and AS/NZS 3572.22

viscosity meter is a measuring instrument used to determine a fluid's internal flow resistance or viscosity. It can give the Cps( viscosity reading ) for various liquids under testing. In FRP industries various types of resins and chemicals used so we need to test the viscosity using this Viscositymeter before starting for production

Geltimer is a machine used in FRP Industries for testing the Resins Initial curing time , With this geltime we may know the correct working time for the resin which avoids failure and wastages . So this Geltime is most important . This machine will also give the exothermic temperature of the resin if you use advanced Geltimer.

Spark Tester are employed in the non-destructive detection and location of pinholes, bare spots or thin points in protective coatings applies for corrosion protection over metal and concrete (conductive) surfaces. With corrosion an extremely costly and disruptive worldwide problem, preventative measures becomes essential. For newly constructed tanks, pipelines and other installations, where corrosion prevention coatings had to be applied, specifications will normally call for a specific coating at a specific thickness. By using a our Spark Tester to verify the uniformity of the coatings, one can satisfied that his or her responsibility has been met.

Polygauge thickness sensor used for testing laminate thickness 31.75mm and lining thickness12.7mm. The standard of the industry (ASTM D-4166) Accurate thickness measurement in inches & metric on your FRP (GRP) laminates and linings. Measures thickness of any non-magnetic materials such as rubber, lead, wood, polyester, aluminium, etc Quality Control Instruments

VacLeak LEQ-70 is a compact economical vacuum leak detector for finding leaks in vacuum bags, sealant tapes, hoses, and fittings. VacLeak LEQ-70 converts the ultrasonic sound produced by leaks to an audible level and also visually displays the leak on an LED meter. The sound is further amplified as the receiver is placed closer to the leak source.